Twenty four-inch long, No. 2 taper-sawn wood shakes of naturally durable wood installed on a roof slope of 4:12 or greater shall have a MAXIMUM exposure of
Twenty four-inch long, No. 2 taper-sawn wood shakes shall have a MAXIMUM exposure of 7 1/2 inches.
According to building codes, when installing 24-inch long, No. 2 taper-sawn wood shakes on a roof slope of 4:12 or greater, the maximum exposure allowed is 7 1/2 inches to ensure proper water shedding and structural integrity.
This exposure is too small for 24-inch long wood shakes. While a smaller exposure may provide extra water protection, it does not adhere to standard guidelines for proper installation of this type of roofing material, which specifies a greater exposure for optimal performance.
This choice correctly reflects the maximum exposure allowed for 24-inch long, No. 2 taper-sawn wood shakes installed on a roof with a slope of 4:12 or greater. This specification ensures that the shakes overlap sufficiently to provide effective waterproofing while allowing for expansion and contraction of the wood.
An exposure of 8 inches exceeds the maximum limit set by building codes for this type of roofing material. Such an exposure could compromise the roof's ability to shed water effectively, increasing the risk of leaks and structural damage over time.
This option significantly exceeds the maximum exposure guidelines for 24-inch long wood shakes. A 10-inch exposure would not provide adequate overlap, thereby increasing the likelihood of water infiltration and potential damage to the underlying structure.
The correct maximum exposure of 7 1/2 inches for 24-inch long, No. 2 taper-sawn wood shakes ensures that the roofing system remains effective at shedding water while maintaining structural integrity. Exceeding this exposure can lead to increased risks of water damage, while a smaller exposure is not necessary and does not align with the established standards. Proper adherence to these guidelines is crucial for the longevity and performance of roofing installations.
Related Questions
View allAll of the following are recognized properties of plain-wood fiberboar...
Which of the following is the capital of the United States?
How many ridgecaps can a roofer cut out of a bundle of 27 three-tab sh...
In roofing terminology, what is a square?
What is the MINIMUM weight of copper for flashings and valleys?
Related Quizzes
View all- ✓ 500+ Practice Questions
- ✓ Detailed Explanations
- ✓ Progress Analytics
- ✓ Exam Simulations