There is a 5-inch stack with a total connected load of 450 drainage fixture units The length of the stack vent is 25 feet The MINIMUM required vent size is
The MINIMUM required vent size is 4 inches.
According to plumbing codes, the minimum vent size is determined based on the total connected load and the length of the stack vent. In this case, with a 450 drainage fixture unit load and a 25-foot stack vent, a 4-inch vent size is mandated to ensure proper ventilation and drainage.
A 2 1/2-inch vent size is insufficient for a connected load of 450 drainage fixture units. Plumbing codes typically require larger vent sizes for higher loads to ensure the safe and effective removal of sewer gases and to maintain proper drainage function.
While a 3-inch vent can accommodate a smaller connected load, it falls short for a 450 drainage fixture unit load over a 25-foot stack vent. The size is inadequate for maintaining the necessary airflow and pressure balance within the drainage system.
This is the correct answer, as a 4-inch vent size is appropriate for a total connected load of 450 drainage fixture units over a length of 25 feet. This size ensures compliance with plumbing codes, facilitating effective drainage and preventing potential blockages or improper venting.
Though a 5-inch vent size would certainly meet the requirements for this load, it exceeds the minimum necessary size. Plumbing codes generally specify the minimum size needed to ensure safety and functionality, making a 5-inch vent unnecessary for this situation.
In plumbing design, the minimum required vent size is crucial for ensuring proper drainage and air circulation. With a connected load of 450 drainage fixture units and a stack vent length of 25 feet, a 4-inch vent meets the requirements set by plumbing codes. While larger sizes may be permissible, they are not needed, highlighting the importance of adhering to minimum standards for safety and efficiency.
Related Questions
View allWhich of the following is a CORRECT statement with regard to the testi...
Which fixtures may be double-trapped
What is the drainage fixture unit value for a wall-hung
Assume that all sewer piping is installed at a slope of 1/4 inch per f...
What is the MAXIMUM unsupported length between the end sprinkler and t...
Related Quizzes
View allNo related quizzes currently available.
- ✓ 500+ Practice Questions
- ✓ Detailed Explanations
- ✓ Progress Analytics
- ✓ Exam Simulations