In a warning line system of fall protection, the line shall be supported in such a way that its lowest point (including sag) is no less than
The lowest point of a warning line system shall be no less than 34 inches.
In a warning line system for fall protection, regulations specify that the line must be positioned at a minimum height of 34 inches from the surface to effectively warn workers of potential fall hazards. This height ensures visibility and helps maintain a safe working environment.
Setting the lowest point of the warning line at 30 inches does not comply with safety regulations, as it is below the minimum requirement. This height could lead to insufficient visibility for workers, increasing the risk of falls and accidents on the job site.
A warning line positioned at 32 inches also fails to meet the necessary safety standards. Like the 30-inch option, this height is too low to provide adequate warning for workers, potentially compromising their safety and increasing the likelihood of falls.
The correct height for the lowest point of a warning line system is 34 inches. This measurement aligns with safety regulations and ensures that the warning line is both visible and effective in preventing falls, thereby enhancing workplace safety.
While a warning line at 36 inches would exceed the minimum requirement, it is not the specified height. Although it may provide additional safety by being higher, the question asks for the minimum allowable height, making 34 inches the correct choice.
In summary, the minimum height for the lowest point of a warning line system is 34 inches, as this is the standard that ensures visibility and safety for workers at risk of falling. Heights below this standard do not comply with safety regulations and could lead to hazardous situations on the job site.
Related Questions
View allAll of the following are recognized properties of plain-wood fiberboar...
Which of the following is the capital of the United States?
How is the slope of a roof calculated?
On a hip roof, what shape should ridge caps cut from 3-tab shingles be...
In a trench which is 4.5 feet deep, ladders are REQUIRED at NOT more t...
Related Quizzes
View all- ✓ 500+ Practice Questions
- ✓ Detailed Explanations
- ✓ Progress Analytics
- ✓ Exam Simulations