Horizontal copper tube with a 1 1/2 inch diameter and assembled with soldered joints MUST be supported at a MAXIMUM interval of ______
Horizontal copper tube with a 1 1/2 inch diameter must be supported at a maximum interval of 6 feet.
This requirement ensures structural integrity and safety in plumbing systems, preventing sagging and potential failure of the joints over time. Proper support intervals are crucial for maintaining the functionality and longevity of the piping system.
While 5 feet is a reasonable support interval for some piping systems, it is not the maximum allowable distance for a 1 1/2 inch diameter horizontal copper tube. This choice suggests a more frequent support requirement than necessary, which can lead to unnecessary material costs and labor.
This is the correct answer, as the code specifies that horizontal copper tubes of this diameter must be supported at intervals not exceeding 6 feet. This standard balances the need for adequate support while minimizing excessive material usage and installation efforts.
A support interval of 10 feet exceeds the maximum standard for a 1 1/2 inch diameter horizontal copper tube. Allowing such a long distance between supports could lead to sagging, increased stress on joints, and potential leaks or ruptures in the system.
Similar to option C, a 12-foot support interval is too lenient for this size of copper tubing. Such spacing increases the risk of structural issues and does not comply with established plumbing codes, potentially compromising the safety and reliability of the installation.
Supporting horizontal copper tubing at the correct intervals is crucial for ensuring the system's longevity and safety. For a 1 1/2 inch diameter tube, a maximum support distance of 6 feet is mandated, balancing structural needs with practical installation. Other intervals like 5, 10, and 12 feet either exceed or do not meet the required standards, emphasizing the importance of adherence to plumbing codes for maintaining system integrity.
Related Questions
View allUsed water from cooling equipment
Which of the following materials CANNOT be used within the building wa...
A sediment trap shall be installed when REQUIRED by the manufacturer o...
What is the MAXIMUM length of the trench system or gravity beds when i...
What is the MINIMUM required waste outlet for a laundry tub
Related Quizzes
View allNo related quizzes currently available.
- ✓ 500+ Practice Questions
- ✓ Detailed Explanations
- ✓ Progress Analytics
- ✓ Exam Simulations