A cricket or saddle shall be installed on the ridge side of any chimney with a width greater than
A cricket or saddle shall be installed on the ridge side of any chimney with a width greater than 30 inches.
The installation of a cricket or saddle is required to prevent water accumulation on the chimney, which can lead to leakage and structural damage. Specifically, the regulation stipulates that this installation is necessary for chimneys wider than 30 inches to ensure proper water drainage.
This is the correct choice as it is the specified width at which a cricket or saddle is mandated for installation. The regulation aims to address water runoff effectively, preventing potential damage from water pooling around wider chimneys.
This measurement is incorrect because the regulation specifically states that the cricket or saddle requirement applies to chimneys wider than 30 inches, not 23 inches. A chimney width of 23 inches does not meet the threshold necessitating this protective feature.
This option is also incorrect since it falls below the required width of 30 inches. Chimneys measuring 18 inches wide do not require the installation of a cricket or saddle as per the guidelines, indicating that they are less prone to water accumulation issues.
Similarly, a chimney width of 16 inches is incorrect regarding the need for a cricket or saddle. This width is significantly below the specified 30 inches, thus exempting it from the installation requirement aimed at preventing water-related problems.
The requirement for installing a cricket or saddle on the ridge side of a chimney is clearly defined to apply only to those with a width greater than 30 inches. This regulation is crucial in ensuring proper drainage and minimizing the risk of water damage to the chimney structure. Options B, C, and D do not meet the specified criteria, confirming that only a chimney wider than 30 inches necessitates this protective measure.
Related Questions
View allA coal-tar, built-up roof should typically have what MINIMUM slope to...
What is the MAXIMUM allowable span for a 2 x 8 #2 spruce-pine-fir raft...
Valley flashing for slate roofs shall be a MINIMUM of
Which of the following roof types is generally NOT used on slopes of l...
Which is true about the slope requirements for a re-roofing installati...
Related Quizzes
View all- ✓ 500+ Practice Questions
- ✓ Detailed Explanations
- ✓ Progress Analytics
- ✓ Exam Simulations